The Kanger TopBox Nano E-Cigarette Starter Kit is a variable voltage device which offers up to 60 watts of output capable of resistances as low as 0.1 ohm. It is a variable voltage/temp control mod kit which allows the user to adjust by wattage or by temperature. It comes equipped with plenty of power via a 3000mAh rechargeable 18650 cell battery (included) and can be filled very easily storing up to 3.2ml of E-Liquid at a time.
Solid Build Quality
From top to bottom, the TopBox Nano is built out of quality materials. It offers a good quality feel in the hand made of high quality stainless steel metals. The tank portion is made from Pyrex glass which is durable and easy to clean.
Variable Control
You can control the TopBox Nano via temperature or by wattage. Adjust the wattage anywhere from 7W - 60W depending on the power needed.
Why do you need more power?
Many people like a bigger throat hit and more vaper and when you set the unit to a higher wattage or temperature, you are heating the E-Liquid hotter and much quicker resulting in more vaper, more nicotine, more of a throat hit. You also go through E-Liquid much quicker at a higher setting.
Recommendations: We recommend setting the unit to 15 - 20W at the beginning and slowly work up from there if needed. Most people are fine around the 20W mark, but this unit gives you the freedom to adjust as needed. You can also change it to temperature so you can adjust using temperature settings, however be sure the coils installed can be used in temperature mode as some are designed to only function in wattage mode.
Recommendations: The TopBox Nano utilizes up to 60 watts of power when heating up the coil in the atomizer. The hotter an atomizer fires, the more liquid is used. When you have a high nicotine E-liquid being used in conjunction with that liquid being high in propylene glycol, users will experience a very intense throat hit which may be too much for some people. We recommend users use liquids that are at least 50% vegetable glycerin and below 8mg of nicotine and work up or down from there as needed.
Airflow Control
At the base of the tank there is an airflow ring. turning the bottom ring one way will open the air hole to let more air in, and turning it the other way will close the air hole to keep air out. The more air you let in, the bigger the puff and vice versa closing the air hole completely will make it very difficult to take a puff.
Different Resistances
Different atomizers (coils) for the TopBox Nano may have different resistances. The more the resistance, the less vaper you will receive and the less resistance, the bigger the vaper cloud and throat hit will be. Your kit will come with 3 atomizers/coils all with different resistances to try. Pick the one that is right for you and then you know what you will need in the future. The TopBox Nano is capable of utilizing atomizers/coils with as little as 0.1 ohms resistance.
The TopBox Nano comes with:
- (1) 0.15 Ohm SSOCC
- (1) 1.5 Ohm SSOCC
- (1) 0.5 Ohm Clapton Coil
SSOCC - Stands for (Stainless Steel Organic Cotton Coil). This is basically the atomizer which will heat up via the power from the battery which in turn heats up the E-Liquid. It uses organic japanese cotton to absorb the E-Liquid
Safety First
When TopBox Nano is not in use, you can click the button 5 times and the battery will turn off. When you need to use it again, simply click 5 more times and the battery will turn on. This prevents accidental turning on of the battery when it is in a bag, purse. Also please never carry batteries loose in a bag, purse or pocket. Make sure they are always in a carrying case and there is no chance of any metal object coming in contact with the battery connector.
Protection
The TopBox Nano features several protection features regarding the unit and battery during operation and also during charging.
Protection features include:
- Short Circuit Protection
- Overcurrent Protection
- Low Voltage Protection
- Low Resistance Protection
- Low Battery Protection
- Reverse Battery Polarity Protection
The unit also features a 10 second auto-cutoff to ensure proper operation and burning of the atomizer (giving it a chance to cool down). Additionally the unit can be turned on via the power button by pressing it 5 times very quickly and be turned off again by pressing the power button 5 times quickly.
Quick Charge Battery System
TopBox Nano uses one single 18650 battery (included) which takes about 1-2 hours to fully charge using the supplied micro usb charging cable. Only use 18650 batteries purchased from eCigarettes Canada in this device as they have been approved to work with TopBox Nano.
Included with your purchase:
- 1 x Kanger TopBox Nano 60W Mod with Temp Control (Pink)
- 1 x Efest 18650 3000mAh 3.7V 35A Rechargeable Battery
- 1 x Kanger TopTank Nano
- 1 x SSOCC 0.15ohm Atomizer/Coil
- 1 x SSOCC 1.5ohm Atomizer/Coil
- 1 x Clapton Coil 0.5ohm Atomizer/Coil
- 1 x Pyrex Glass Replacement
- 1 x Micro USB Charging Cable
- 1 x User Manual
WARNING: It is important to use only the battery supplied with the unit itself or a battery that is compatible and purchased from eCigarettes Canada. We will not be responsible for any damage or injury for using another suppliers battery with our products.
WARNING: Only charge this device with the charger supplied in the box. Do not use a charger from another device or another supplier. Using chargers with different specifications may result in fire and or personal injury.
WARNING: When charging your TopBox Nano, please charge it on a flat hard surface away from any flammable materials. Never leave the device charging unattended and never charge the battery overnight while sleeping.
WARNING: Never leave the battery on the charger longer than neccessary. When there is a full charge indicated, remove the device from your charger. Leaving a device on charge for too long may lower the batteries lifespan.
